Haier D1200P Smart Settings on Ubuntu

Tempted by the cheap modem I bought a modem Smart Haier D1200P for weapons when on the road. While in Jakarta, I tried but not succeeded because the time was mepet besides my brain capacity is also small. At that time I dicritani by Kang Andy MSE that he would buy a 3 seed if ya can guarantee the sale of modems can walk on Linux.

With great struggle tireless finally wear Smart internetan Haier D1200P in Ubuntu 8.10. Helped by finally enlightened Pradna kang on this night.

HP's bener Poor nyari signal to be hanged. Endar in front of the house while still in Purwokerto

After looking around to find there is also a guide in
http://ahmadbasuki.web.id/2009/02/internetan-dengan-smart-di-ubuntu-810/

http://dodolboks.wordpress.com/2009/02/08/setting-koneksi-internet-hp-smart-d1200p-di-ubuntu/

http://skyisgrey.org/blog/smart-haier-d1200p-koneksi-internet-via-pon-ubuntu-linux.html/

http://awangga.wordpress.com/2009/01/10/setting-koneksi-internet-smart-haier-mobile-d1200p-sebagai-modem/

0. Connect first to use Window $ without direct diskonek moved to ubuntu. (Do not see a way to eliminate this step)

1. "Going to the super user!"
Nadiah Nadiah @-desktop: ~ $ sudo su

2.
root @ Nadiah-desktop: / home / Nadiah # sudo-i

3. "Detection modem!"
root @ Nadiah-desktop: ~ # lsusb

Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 004: ID 15eb: 0001
Bus 002 Device 003: ID 10d6: 1100 Actions Semiconductor Co.., Ltd. MPMan MP-Ki 128 MP3 Player / Recorder
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

4. "Define hp!"
root @ Nadiah-desktop: ~ # sudo modprobe usbserial vendor = 0 × 15eb product = 0 × 0001

5. "Check HP! Should terdetek as ttyUSB0 and ttyUSB1 "
root @ Nadiah-desktop: ~ # dmesg

[15578.963467] usbserial_generic 2-2:1.0: generic converter detected
[15578.963618] usb 2-2: generic converter now attached to ttyUSB0
[15578.963638] usbserial_generic 2-2:1.1: generic converter detected
[15578.963707] usb 2-2: generic converter now attached to ttyUSB1
[15578.963721] usbcore: registered new interface driver usbserial_generic
[15578.963725] / build/buildd/linux-2.6.24/drivers/usb/serial/usb-serial.c: USB Serial Driver core
root @ Nadiah-desktop: ~ #

6. In order not easy diskonek
root @ Nadiah-desktop: ~ # gedit / etc / ppp / options

"Look!"

lcp-echo-failure 4

"Change the number 4 to as much as possible!"

7. "Create a dialer like this!"
root @ Nadiah-desktop: ~ # gedit / etc / wvdial.conf

[Dialer Defaults]
Phone =
Username =
Password =
New PPPD = yes
[Dialer smart]
Modem = / dev/ttyUSB0
Baud = 230,400
Init1 = atze0Q0v1
Init2 = ate0q0v1
Init3 = at
Init4 = at crm = 1; cmux = 1; cps = 33; CTA = 0
FlowControl = CRTSCTS
Phone = # 777
Username = smart
Password = smart
Ask Password = 0
Dial Command = ATDT
Stupid Mode = 1
CompuServe = 0
Idle Seconds = 300
ISDN = 0

8. "Konekan!"
root @ Nadiah-desktop: ~ # wvdial smart


Now that the sign was conn.

In order not diskonek every 50 minutes, change the configuration options ppp

$ Sudo gedit / etc / ppp / options

remove and replace the options in / etc / ppp / options to be as follows

asyncmap 0
noauth
crtscts
modem
proxyarp
noipx
persist
1000000 idle

http://solvewithit.com/2009/08/08/setting-smart-haier-d1200p-pada-ubuntu/