interafe of the world

Rabu, 08 Juli 2009

Setting Modem Tecom AR 1021

To settingan modem Tecom AR 1021 is almost the same as the default modem kebanyakan.Ip from the modem is in DHCP 192.168.1.1dan modem enable.Biasanya LAN no ip disetting because its computer could have dinamic ip modem.Kalau of connection to the modem is ok, then we can go kesettingan modem.untuk settingan can be done via modem browser, like mozilla firefox, internet explorer, etc over.

Setting bridge:
1. Open the Internet browser Explorer.Pada address type "192.168.1.1" (ip modem), then exit akan request a username and password modem.Untuk modem Tecom AR 1021 this username is "admin" and password is also "admin".

2. After that will appear Tecom.Klik menu "Advanced Setup", click "WAN". Settingan then will appear in the default modem.Sebaiknya settingan existing diremove only or can also edit.Sekarang contreng remove the column to select the settingan akan remove the , then click "remove".

3. Now settingan who have already diremove.Lalu to create a new settingan, click "Add."

4. Enter the VPI: 8 and VCI: 81 (VPI and VCI for Dslam ZTE), service category: UBR and click "Next".

5. Connection type : "Bridging" dan Encapsulation : " LLC/SNAP-BRIDGING, lalu klik "Next".

6. Klik "Next" saja.

7. Klik " Save"

8. Then click on "Save / reboot". akan then restart the modem and the modem may have been used with the speedy dial icon that has been made.

Setting PPOE:
To settingan PPOE do almost the same as settingan bridge, lankah is as follows:

1. Open the Internet browser Explorer.Pada address type "192.168.1.1" (ip modem), then exit akan request a username and password modem.Untuk modem Tecom AR 1021 this username is "admin" and password is also "admin".

2. After that will appear Tecom.Klik menu "Advanced Setup", click "WAN". Settingan then will appear in the default modem.Sebaiknya settingan existing diremove only or can also edit.Sekarang contreng remove the column to select the settingan akan remove the , then click "remove".

3. Now settingan who have already diremove.Lalu to create a new settingan, click "Add."

4. Enter the VPI: 8 and VCI: 81 (VPI and VCI for Dslam ZTE), service category: UBR and click "Next".

5. Connection type: "PPP over Ethernet (PPOE)" and Encapsulation: LLC / SNAP-Bridging, and click "Next".

6. So there will be a confirmation request username and password.Username here is no speedy you have a speedy and password berlaku.misalkan is 111401100xxx username and password @ telkom xxxxxx.Untuk PPOE service name can diisikan "speedy" or "telkom" because this is not too effect for koneksi.Lalu click "Next" only.