Minggu, 31 Mei 2009

Internet Connection with CDMA

Handphone CDMA installation phase:

1. Preparation to make the Com Port, modem communication is done through Com port data cable and used to work as a Com Port. How to alter the function of the USB Cable into a COM data on the PC
2. Handphone recognize as a modem. Setting the driver from the driver after install dibukanya Com Port then the software can recognize WinXP Handphone as Modem
3. The process for the Network connection in Windows XP, after the COM port and Modem Install completed, the process is entering the final connection from the modem as a connection to the Internet.

Equipment Internet connection with CDMA Handphone

Equipment can be used for:

* Prolific DKU-GW-001-Compatible Data Cable Nokia DKU5
* Nokia 6585 CDMA
* Starone CDMA Prepaid

Equipment for the PC:

* Pentium P4 2.4C @ 3.3Ghz
* Memory 1GB
* Seagate 120GB SATA Harddisk
* USB port internet ICH5


Cable Function simulation data than a Com Port, also work as a function of mobile data transfer to PC. While the modem work as a modem in your PC's internet connection. In the picture below is how the Data Cable at the bottom of the mobile phone and connected to the USB port.

The first stage: menginstalll COM port data cable from Prolific

As on the PC, when a device through a modem akan port or USB port. For CDMA systems through data cable also needs to be activated ditanamkan the Com port on the USB Data Cable.

This early stage is under way to install the USB driver disimulasikan as a Com port to connect a PC to connect Handphone.

By using Data Cable Prolific, it is easier than installing from the original Cable Data DKU-5 drivers who need ukuranbesar. You simply pair Data Cable Prolific and Windows will ask the driver to recognize the USB port Data Cable Prolific as in the picture below.

After entering the CD and install, it will be showing new Com port on the Device manager. This means the installation of the driver Prolific Com port is active and ready to be used to connect the phone to the USB portseperti on the image below..

At this stage you have finished making the new Com port Cable Data Com Port that will be used as a modem from Handphone and Com port for the connection between the PC and modem / Handphone. Cable alter the function of data into the USB port Com Port on the operating system


Stage two: Install Modem for Handphone through Data Cable

Then provide an introduction to the Com port for the modem, click on Phone and modem control panel

It will appear as options in the image below

Log in to the modem. In the picture below, there is a modem with the chip-set for dial-up and does not have an article with this hubunganya. For the addition on the modem that enabled Handphone, you simply select the ADD and do not forget to click Do not Detect my modem. Because the modem must be installed in the driver manually

Enter a search name kebagian modem, click the Have Disk to install the modem driver on the new Handphone

Then input your driver handphone. And you can download the modem driver here

When you use the Nokia, it will be shown 3 options. Internet connection for you just as mengclick the 3G CDMA modem driver you

Then provide a port for your modem that has been in the Install, on the image below shows the options for Prolific Port 6 data cable that will be recognized by the Windows operating system to activate the modem for Com 6 Handphone

Completed this process you have 2 modems, the first dial-up modem from Lucent and the second modem via Nokia Handphone and Com port of the Data Connection Cable

At this stage you have finished installing the Com port of the Windows operating system and the modem to use as your connection to your mobile phone.

Phase three: Install Internet connection to Window for CDMA modem

As you are using a dial-up modem or ethernet broadband, each relationship is also required type of network connection and the type you need

To connect to the Internet, simply use the Wizard from Windows XP. Kebagian enter your Control Panel and click Network Connection

You just mengclick the Create New Connection in the sub menu Network Connection

Next Connection Wizard will appear, and click Next

Select Direct connection to the Internet

And input to connection setup manual

Select the dial-up, because the use Handphone system such as a phone and you need to dial the number manually to connect via CDMA mobile phone

Enter the name of the connection, for example Indosatnet as in the picture below

Enter the number for connection to the Internet Provider, for use Starone # 777

Enter a login name and password

Completed at the stage to create a modem icon on the Windows desktop and your mobile phone modem is ready to connect to the internet provider

To pass up connection you just mengclick connection that you have created, such as using a dial-up connection

When all the settings correct, then your connection will be connected directly to the CDMA provider. Visible in the image below 230Kbps connection speed.


http://www.intikamedia.com

Tidak ada komentar:

Posting Komentar